SeaTalk Integration with Raymarine C-Series, Instruments and Autopilots

C-Series, ST60+, ST290, SmartPilot? No problem. RayTech RNS 6.0 is the only PC based navigation certified and engineered to work with Raymarine's SeaTalk navigation network. Using our PC-SeaTalk-NMEA Interface, you have instant access to all of your vital instrument and navigation data like wind speed and direction, speed through the water, GPS latitude/longitude and more. SeaTalk links RayTech RNS 6.0 to the full line of Raymarine autopilot systems, enabling the autopilot to steer to a waypoint or follow a route.

hsb2 Integration with Pathfinder Plus

Raytech RNS 6.0 also supports integration with Raymarine's previous generation Pathfinder Plus series display with hsb2 networking. Using either a USB 2.0 or PCMCIA Network Interface Kit, and the PC-SeaTalk-NMEA Interface, RayTech RNS 6.0 can share and control radar, C-MAP NT+ cartography and HD Digital™ fishfinder with devices such as the RL70CRC+, Raychart 530+, L770DRC+ and more.

NMEA 0183 Interfacing

Do you have a mix of equipment on board that you'd like to be able to communicate with? No problem here either. RayTech RNS 6.0 supports the NMEA 0183 data protocol of the National Marine Electronics Association. The number of devices that RayTech can connect to is limited only be the number of serial connections you PC has available. RayTech RNS 6.0's automated instrument detection and configuration makes set up easy. For the advanced installer, you can goin in and customize the individual NMEA 0183 sentences transmitterd and received by the system.