Raymarine Instrument Transducer Options

 

Please select a category to show the Instrument Transducers that are most suited for you.

 

I would like my transducer to record.....

 

Other Transducers

 

 

 

Wind

Compass

Rudder Reference

Rotavecta (speed/angle) 

Wind Vane (speed/angle) 

Fluxgate 

Rudder Angle 

  Rotavecta wind grey       

Rotavecta Wind  

Fluxgate compass    

Rudder Angle    

Z195

30m cable: E22078
50m cable: E22079

M81190

M81105

View Details 

View Details 

View Details 

View Details 

 

 

 

Compatibility and connectivity

 

WIND

 

In a wind system you can choose between a Rotavecta transducer or a Wind Vane transducer.

   

 

SeaTalk1 

 

The Rotavecta wind transducer is compatible with the ST40 and ST60+ wind instruments on the SeaTalk1 network. The transducer simply connects to the back of one of the following instruments:

  • ST40 Wind
  • ST60+ Wind

 

The Wind Vane transducer is compatible with the ST60+ Wind Instrument on the SeaTalk1 network.

    ST60+ wind transducer connection  

 

SeaTalkng 

 

Both the Rotavecta and Wind Vane transducers are compatible with the i70, ST70 and ST70+ instruments on the SeaTalkng network via an iTC-5 transducer converter (sold separately). The transducer is connected to the iTC-5 which converts the transducer signals to SeaTalkng. The iTC-5 is then connected to your SeaTalkng backbone.

 

The Wind Vane transducer can also use a ST70 wind pod to connect to the SeaTalkng network.

 

 


COMPASS

 

  Fluxgate Compass transducer to ST60+   

SeaTalk1 

 

The Fluxgate Compass transducer is compatible with the ST40 and ST60+ instruments on the SeaTalk1 network. The transducer simply connects to the back of one of the following instruments:

  • ST40 Compass
  • ST60+ Compass

 

 

SeaTalkng 

 

The Fluxgate Compass transducer is compatible with the i70 , ST70 and ST70+ instruments on the SeaTalkng network via an iTC-5 transducer converter (sold separately). The transducer is connected to the iTC-5 which converts the transducer signals to SeaTalkng. The iTC-5 is then connected to your SeaTalkng backbone.

 

Note that if your system contains an SPX autopilot the Fluxgate Compass should connect directly to the course computer and not the iTC-5.

 


RUDDER REFERENCE

 

 

SeaTalk1 

 

 

The Rudder Reference transducer is compatible with the ST60+ instruments on the SeaTalk1 network. The transducer simply connects to the back of one of the ST60+ Rudder Angle Indicator instrument.

    Rudder reference transducer to ST60+ 

 

SeaTalkng 

 

 

The Rudder Reference transducer is compatible with the i70 , ST70 and ST70+ instruments on the SeaTalkng network via an iTC-5 transducer converter (sold separately). The transducer is connected to the iTC-5 which converts the transducer signals to SeaTalkng. The iTC-5 is then connected to your SeaTalkng backbone.

 

 

Note that if your system contains an SPX autopilot the Rudder Reference should connect directly to the course computer and not the iTC-5.

 

 

If you require more help selecting a transducer, view our "selecting a transducer" guide  

 



Transducer Manuals & Specifications


Transducer installation guides and technical specifications are available on the Airmar website. Note that these documents are owned and controlled by Airmar. Raymarine takes no responsibility for any information provided on the Airmar website or any of the documents available on the website.

Go to Airmar site


Compare Raymarine Instrument Displays

 

Instruments

  

Still undecided?

 

Compare all Raymarine Instrument Displays