Raymarine RS130 GPS Receiver with STng / NMEA 2000

RS130 GPS(1)

Compact and Accurate

Key Features

ST^ng / NMEA 2000 (certified) connectivity
Space Based Augmentation System (SBAS) enabled.
WASS, EGNOS, MSAS and GAGAN
< 9.84 ft (3m) accuracy typical, < 16.4 ft (5m) accuracy guaranteed
Very high sensitivity: -162dBm
50 channel GPS receiver
Low power: 50mA (1 LEN)

Discover more specifications

Do I need an RS130 GPS?

Choose your display option to find out if you need an external GPS and how to connect a RS130 to your system:

Display

Do you require a GPS?

A Series

(A50/A50D, A57/A57D, A70/A70D)

Typically you do not require an external GPS because your Multifunction Display incorporates an integrated GPS receiver.

However, there are some circumstances when you may require an external GPS - for example within a steel wheelhouse where the Multifunction Display will not receive GPS signals.

If in doubt, contact your Raymarine dealer who can advise you whether an external GPS is necessary.

New e Series

(e7, e7D, e95, e97, e125, e127)

New c Series

(c95, c97, c125, c127)

C Series Widescreen (C90W, C120W, C140W)

E Series Widescreen (E90W, E120W, E140W)

The E Series Widescreen displays do not have an integrated GPS and therefore require an RS130 connected via a SeaTalk^ng backbone.

C Series Classic

(C80, C120)

Raymarine Classic Multifunction Displays require a SeaTalk¹ to SeaTalk^ng converter to connect an RS130. Find out more.

E Series Classic

(E80, E120)

Connections

RS130 standard connection

RS130 Extended Connection

NMEA2000 Plug and play

ST^ng - Standard Connection

ST^ng - Extended Connection

Plug and play: NMEA 2000

SeaTalk^ng GPS receiver
SeaTalk^ng spur cable
SeaTalk^ng T-piece. You can also use a 5-way connector block.
SeaTalk^ng backbone

Note: A terminator must be fitted at each end of the SeaTalk^ng backbone.

SeaTalk^ng GPS receiver
SeaTalk^ng spur cable
SeaTalk^ng inline terminator (part A80001 - sold separately)
SeaTalk^ng backbone

SeaTalk^ng GPS receiver
SeaTalk^ng to DeviceNet adaptor cable (male - part number A06046 or female - part number A06045 version as appropriate)
DeviceNet cable (sold separately)

Find out more about networking