Raymarine SeaTalkhs Connections

SeaTalkHS diagram with HS5 

SeaTalkhs Plug and Play

 

By using SeaTalkhs networking, you can instantly transfer radar, chartplotter, fishfinder, thermal imaging and navigation functions. Configuring your system is a simple as determining which SeaTalkhs devices you'd like to have (chart, radar, sonar, video) and where you would like to see them.  

     

space

 

Networking two devices

 

The most basic system may consist of a C Series Widescreen or an E Series Widescreen with a DSM30, DSM300 or a radar.

 

Using a SeaTalkhs Crossover coupler, they can be quickly and easily connected together. Because the components are all auto sensing, there is no complicated setup required. Simply plug them in.

 

If you're not using a DSM, you can link any two E Series Widescreen displays with the crossover coupler too.

 Sea Talk HS with coupler and E Series Wide 

 

 

space

   

 

HS-5 SeaTalk HS Network Switch    

Multistation Networking - New HS-5 SeaTalkhs Network Switch

 

SeaTalkhs data is quickly distributed to other SeaTalkhs using the HS-5 Network Switch.

 

The switch has 5 ports - 4 RayNet ports supporting 10 or 100 Mbit/sec network speeds and a 5th gigabit port allowing a higher speed across switches, should a 2nd switch be necessary.

 

 

 

 

When networking three to eight SeaTalkhs devices, the SeaTalkhs Network Switch can be used.

 

 

The auto sensing SeaTalkhs components make setup a breeze, simply plug them in. SeaTalkhs does the rest.

SeaTalk HS Network Switch

 

 

space

 

SeaTalkhs Raymarine Products

 

The following devices have SeaTalkhs connections and can be easily connected together via the SeaTalkhs network switch and SeaTalkhs network cables:

 

 

E Series SeaTalk HS network   

 

 

space

  

 

 SeaTalk HS Cable  

SeaTalkhs Network Cables

 

Available in multiple lengths to simplify installation, the SeaTalkhs network cable locks positively into switches and couplers.

 

 

Sizes Available Product Number
1.5m E55049
5m E55050
10m E55051
15m A62135
20m E55052
 

 

 

 

 

 

space

 

 

SeaTalkhs Patch Cables

 

Highspeed patch cable for connecting a SeaTalkhs switch with a PC or G Series monitor.

 

 

Sizes Available Product Number
1.5m E06054
5m E06055
10m E06056

 

Patch cables 

 

 

space

 

 

 Dual End Waterproof   

SeaTalkhs Dual End (Waterproof) Cables

 

The Raymarine SeaTalkhs Dual End Weatherproof Network Cable is designed to connect your Raymarine C-Wide or Raymarine E-Wide to a DSM30 or DSM300.

 

 

Sizes Available Product Number
1.5m A62245
15m A62246
 

 

 

 

 

RayNet to RayNet Cables

 

The new RayNet (F) to RayNet (F) network cable can be used to daisy-chain 2 adjacent RayNet devices together. It is also useful for joining two adjacent HS-5 Network Switches together on larger systems where multiple switches are necessary. This network cable is 15-inches (400mm) long.

This cable joins our existing line of RayNet interconnect cables available in 400mm, 2, 5, 10 or 20 metre lengths.

 

Product

Product Compatibility Data Length
Part Number

Image

Cable

RayNet to RayNet Port Connectivity

Ethernet

400mm

A80161
 RayNet to RayNet 

Cable

 

RayNet to RayNet Port Connectivity

 

Ethernet

2m

A62361
 RayNet to RayNet 

Cable

 

RayNet to RayNet Port Connectivity

 

Ethernet

5m

A80005
 RayNet to RayNet

Cable

 

RayNet to RayNet Port Connectivity

 

Ethernet

10m

A62362
 RayNet to RayNet

Cable

 

RayNet to RayNet Port Connectivity

 

Ethernet

20m

A80006
 RayNet to RayNet