NMEA 2000 / SeaTalkng

 

The current marine industry standard. All current Raymarine MFDs are NMEA2000 certified. The standard utilises the CAN (Control Area Network) design developed by Bosch for the automotive market but with messages/sentence appropriate for the marine industry.

 

A multi-talker, multi-listener approach using serial data at moderate date rates (250kbs).

 

Cable System

 

Under the NMEA standard, manufacturers can use the cable/connector design of their choice so long as it conforms to certain requirements. The topology is a robust terminated backbone/spur design.

  

 SeaTalk ng    SeaTalkng

Raymarine’s proprietary cable system for use in NMEA 2000 networks. The design provides two advantages. First, the connector collars are retained on the product which allows for a smaller cable diameter making installations easier. More importantly, the cable can include a sixth wire which allows for backward compatibility with SeaTalk1 equipment. Products with SeaTalkng connectors can be used on NMEA 2000 networks that use Devicenet cabling through simple connector adaptors and conversely equipment with Devicenet connectors can be used on NMEA 2000 networks that use SeaTalkng cabling through simple connector adaptors.

 

Explore the networking possibilities with SeaTalkng

     
DeviceNet   

Devicenet

Created for the factory automation industry, Devicenet has been approved by the NMEA for NMEA 2000 installations.

 

Explore Devicenet cables

 

Available cables:

 

Adaptor Cables

 

 

DeviceNet Adaptor Cables

DeviceNet Adaptor cable 

Adapts SeaTalkng to NMEA2000 network.

For use with E & C Series Widescreen, G Series, and ST70 systems.

Available with Male or Female ends

 

 

 

Female 15.7in (0.4m) A06045
Male 15.7in (0.4m) A06046

 

 


 

 

 

ST1 Adaptor Cable (3 Pin)

 SeaTalk NG to Sea Talk1

An adaptor spur cable to connect a SeaTalk device to a SeaTalkng network. The connection must be made via a 'bridging' device such as an ST70.

 

 

 

 

Cable length Part number
15.7in (0.4m) A06047
3.25in (1m) A22164

 

 

The 15.7ft (0.4m) cable is also available as part of the SeaTalk to SeaTalkng converter kit

 


 

 

 

E-Series to SeaTalkng Adaptor Cable

  ST2 Adaptor Cable (5 Pin)

E-Series to SeaTalk NG Adaptor 

 

    SeaTalk 2 to SeaTalk ng

An adapter spur cable to connect an E-series display to a SeaTalkng network, using the SeaTalk2 port on the back of the E-Series.

  An adaptor spur cable to connect a SeaTalk2 device or network to a SeaTalkng network.
4.92in (1.5m)   15.7in (0.4m)
A06061   A06048

 

 

 


 

 

 

Micro C DeviceNet Adaptor Cables

Micro C DeviceNet Adaptor Cable 

Adapts SeaTalkng to NMEA2000 network.

For use with E Series.

Available with Male or Female ends

 

 

 

 

Female 15.7in (0.4m) E05026
Male 15.7in (0.4m) E05027