Software for Raymarine AIS700

  • Software for: AIS700
  • Version: v1.09.00
  • Date Released: November 2019
 
 
 
 
 
 

Software History

Version Release Date Features
v01.09.00 Nov 2019
  • Improvements to Antenna Fault detection (VSWR alarm)
  • Modification to the functionality of the AIS700, when connected to USB only (for programming). The unit now draws less current and resolves reports of “initialisation” failures.
ProAIS2 v1.14 Mar 2019
  • Improved USB Driver installation
  • Corrects a scaling issue when installed on high DPI displays
v1.06
(150200_01_06_02)
Oct 2018
  • Corrects a timing issue where the AIS "No Sensor Position" alarm is enabled a short period after power up, even though the GPS fix is good.
  • Corrects the spurious UTC Sync. Alarm being generated during normal operation.
  • SART/MOB/EPIRB test messages are now output over the NMEA0183 serial port.
  • Inactive alarms are now not output over the NMEA0183 serial port.
v1.05
(150200_01_05_01)
Aug 2018
  • Corrects a position shadowing issue where (under certain conditions) the vessels own AIS Target is displayed on the chart plotter.
Pro-AIS2 v1.10 Mar 2018
  • Updated to support the AIS700.
v1.03
(150200_01_03_00)
Feb 2018
  • Initial Release