LightHouse II Release 14 - Additional New Features


C-MAP Easy Routing - Automatic Route Generation

New to Lighthouse II R14 is Easy Routing support for C-MAP by Jeppesen.

Easy Routing uses detailed chart data and user vessel information to automatically generate the shortest, safest route between 2 points that are less than 100nm apart.

This feature requires a compatible MFD loaded with C-MAP's premium cartography C-MAP 4D MAX+. The minimum safe draft, beam* and vessel height* also need to be configured in vessel settings.

Automatic Route Generation for Navionics cartography has been supported since LightHouse II R11 and continues to compatible with Navionics+, Navionics Platinum and Platinum+

*Vessel beam and height are required for C-MAP by Jeppesen Easy Routing only. Not required for Navionics Autorouting

       
COMPATIBLE RAYMARINE MULTIFUNCTION DISPLAYS

aSeries

 

cSeries

 

eSeries

 

gS Series

 
a12 c125 & c127 e125, e127 & e165 gS95, gS125, gS165 & gS195

The new eS Series.
Easy routing is compatible on all variants of the new eS Series MFD that are loaded with C-MAP 4D MAX+. Find out more about the NEW eS Series.

 
 

RA205

650

750

Fusion Link Compatibility

Fusion Series Models NMEA 2000 RayNet
RA205 Series MS-RA205
600 Series MS-AV600
MS-IP600
650 Series New MS-AV650
MS-UD650
700 Series MS-IP700i
MS-AV700i
750 Series New MS-AV750
MS-US750

Fusion Link Update

NMEA2000 FUSION Link Support - Works with all the latest models

User Interface Enhancements:

  • Larger touch points
  • Support for dual iPod/USB sources
  • Support for dual Auxiliary inputs
  • International tuner controls
  • Head unit remote power on/off

Fusion software update v1.1.3360 is compatible with Raymarine Multifunction Displays

 
 
 

CP370, CP470 & CP570 Support

 

Full support for Raymarine’s newest line of sonar modules

Improved User Interface with Auto Adjust Controls and Digital Surface Filter

New Ping Sync modes for the independent dual-channel CP570

 

New Digital Surface Filter

  • Digitally filters out water column noise above and beyond automatic settings
  • Excellent reduction of top-water aeration
  • Efficiently minimizes the presence of dense thermoclines to reveal targets throughout
  • Default Auto Setting configured to filter approximately upper 20% of Water Column
 

Aeration and thermoclines are minimized, while still allowing the true fish targets to be revealed

 

Auto Adjust Gain and Intensity Sonar Controls

Allows users to adjust the sonar’s sensitivity and saturation without disabling important noise filters.

Manual controls are still available for transducer diagnostics and those users who prefer to tune their sonar without any additional filtering

Auto Adjust Gain

Auto Adjust Intensity

 

Dual Channel Ping Mode for CP570

  • Enables selection of the sonar’s ping rate vs. acceptable interference
  • 3 unique modes of Sonar Channel Pinging*:
    • Automatic (Default)
      • Selects the best mode to maximize ping rate, thus minimizing interference
      • Independent when selected ranges are within 50% of each other, Simultaneous when difference is greater than 50%
       
    • Independent
      • Both channels ping as if the other doesn’t exist
      • Maximum ping rate, but greater chance of interference
       
    • Simultaneous
      • Both channels ping at the same time
      • Reduced ping rate based on deepest range setting, but reduced chance of interference
       
     

*Located in the Sounder Set-up Menu

 
 

LightHouse II R14 Multilanguage Support

 
  • English (US)
  • English (UK)
  • Arabic
  • Bulgarian
  • Chinese (Simplified)
  • Chinese (Traditional)
  • Croatian
  • Czech
  • Danish
 
  • Dutch
  • Finnish
  • French
  • German
  • Greek
  • Hebrew
  • Italian
  • Japanese
  • Korean
 
  • Malay (Bahasa) NEW
  • Norwegian
  • Polish
  • Portuguese (Brazilian)
  • Russian
  • Slovenian
  • Spanish
  • Swedish
  • Turkish