The CP450C requires 2 elements to function. Either Low/High (LH), Low/Medium (LM) or Med/High (MH). Find out more about frequency in our transducer guide.
The 2 elements can be within one transducer or as single elements in a "transducer pair".
Need help choosing the right transducer? Read our transducer guide
The following transducers have 2 elements within the one transducer.
The M265 is an outstanding in-hull option with 8 internal ceramics and up to 117kHz of total CHIRP range. The in-hull installation eliminates the need to drill any holes in the hull, while accommodating a large range of deadrise angles. The medium-frequency benefits include the ability to identify targets deeper than the high-frequency with benefit of a wider beam angle. The high frequency provides excellent shallow water resolution.
The R111 contains 16 internal ceramics to provide a level of sensitivity superior to the M265. This powerhouse of a transducer will provide excellent clarity and target resolution in water both shallow and deep. The wider beam angle of the medium frequency provides improved shallow water coverage.
The R599 is the ultimate in-hull transducer. Featuring 25 internal ceramics and a total potential output of 3kW, this transducer will outperform any other in-hull option.
The B75's offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel.
Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds.
Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75's together with the Paired CHIRP Transducer Y-Cable (A102146).
The B765 is a good coastal transducer. With up to 115kHz of CHIRP range this transducer covers a number of popular fishing frequencies. The result is good target separation in deep and shallow water alike.
The B175's provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage.
Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds.
Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146).
The B265 is a great CHIRP through-hull transducer. With 8 internal ceramics and up to 103kHz of total CHIRP range the B265LH is a solid choice for serious coastal and offshore fishing.
The TM265 brings CHIRP technology into a transom transducer. With up to 103kHz of CHIRP range and 8 internal ceramics this transducer has the ability to provide great target separation in both shallow and deep water. The medium element will provide better shallow water coverage under the vessel, while the high element will provide better shallow water resolution.
With 16 internal ceramics the R109 is a powerhouse transducer. The thru-hull design ensure maximum performance by putting nothing between the transducer and the water. The added beam width of the medium frequency provides additional visibility in shallower waters.
The R509 contains 25 internal ceramics to provide an unprecedented level of shallow and deep water sensitivity. Pairing this array of elements with the transducers maximum 3kW output and you truly have the best sport fishing transducer on the market. Choose the R509LM for additional coverage in shallow water.
B75L FEATURES | |
Description | B75L 300W Bronze Low Profile Through Hull 0 Degree Tilted Element Transducer |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 300W |
Max Depth (Ft) | 1,200 |
Frequency (KHz) | 40-75 |
Beam Width (L/M) | 32°-21° |
Records | Depth / Temperature |
Approved Hull Material | Solid Fibreglass Only |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | A80016 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75L 12° FEATURES | |
Description | B75L 300W Bronze Low Profile Through Hull 12 Degree Tilted Element Transducer |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 300W |
Max Depth (Ft) | 1,200 |
Frequency (KHz) | 40-75 |
Beam Width (L/M) | 32°-21° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-12° Deadrise |
Part Number | A80033 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75M FEATURES | |
Description | B75M 600W Bronze Low Profile Through Hull 0 Degree Tilted Element Transducer |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 600W |
Max Depth (Ft) | 900 |
Frequency (KHz) | 80-130 |
Beam Width (L/M) | 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | A80017 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75H FEATURES | |
Description | B75H 600W Bronze Low Profile Through Hull 0 Degree Tilted Element Transducer |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 600W |
Max Depth (Ft) | 900 |
Frequency (KHz) | 130-210 |
Beam Width (L/M) | 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | A80018 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75M 12° FEATURES | |
Description | B75M 600W Bronze Low Profile Through Hull 12 Degree Tilted Element Transducer |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 600W |
Max Depth (Ft) | 900 |
Frequency (KHz) | 80-130 |
Beam Width (L/M) | 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-15° Deadrise |
Part Number | A80034 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75H 12° FEATURES | |
Description | B75H 600W Bronze Low Profile Through Hull 12 Degree Tilted Element Transducer |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 600W |
Max Depth (Ft) | 900 |
Frequency (KHz) | 130-210 |
Beam Width (L/M) | 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-15° Deadrise |
Part Number | A80035 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75M 20° FEATURES | |
Description | B75M 600W Bronze Low Profile Through Hull 20 Degree Tilted Element Transducer |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 600W |
Max Depth (Ft) | L: 900 |
Frequency (KHz) | 80-130 |
Beam Width (L/M) | 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 16-24° Deadrise |
Part Number | A80036 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75H 20° FEATURES | |
Description | B75H 600W Bronze Low Profile Through Hull 20 Degree Tilted Element Transducer |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 600W |
Max Depth (Ft) | 700 |
Frequency (KHz) | 130-210 |
Beam Width (L/M) | 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 16-24° Deadrise |
Part Number | A80037 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B765 LH 600W FEATURES | |
Description | B765 LH Bronze Through Hull Transducer with High-Speed Fairing 300W Low / 600W High |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | L:300 / H:600W |
Max Depth (Ft) | L:1,200 / H:700 |
Frequency (KHz) | L:40-75 / H:80-130 |
Beam Width (L/H) | L:32°-21° / H:15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-24° Deadrise |
Part Number | A80014 |
Additional Notes | The B765 is a good coastal transducer. With up to 115kHz of CHIRP range this transducer covers a number of popular fishing frequencies. The result is good target separation in deep and shallow water alike. |
B765 LM 600W FEATURES | |
Description | B765 LM Bronze Through Hull Transducer with High-Speed Fairing 300W Low / 600W Medium |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | L:300 / M:600W |
Max Depth (Ft) | L:1,200 / M:700 |
Frequency (KHz) | L:40-75 / M:80-130 |
Beam Width (L/H) | L:32°-21° / M:24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-24° Deadrise |
Part Number | A80015 |
Additional Notes | The B765 is a good coastal transducer. With up to 115kHz of CHIRP range this transducer covers a number of popular fishing frequencies. The result is good target separation in deep and shallow water alike. |
B175 L 1KW FEATURES | |
Description | B175L Bronze Low Profile Through Hull 0 Degree Tilted Element Transducer 1kW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | 2,500 |
Frequency (KHz) | 40-60 |
Beam Width (L/H) | 32°-21° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | A80042 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 M 1KW FEATURES | |
Description | B175M Bronze Low Profile Through Hull 0 Degree Tilted Element Transducer 1kW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | 1,500 |
Frequency (KHz) | 80-130 |
Beam Width (L/H) | 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | A80043 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 H 1KW FEATURES | |
Description | B175H Bronze Low Profile Through Hull 0 Degree Tilted Element Transducer 1kW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | 1,000 |
Frequency (KHz) | 130-210 |
Beam Width (L/H) | 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | A80044 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 L 12° 1KW FEATURES | |
Description | B175L Bronze Low Profile Through Hull 12 Degree Tilted Element Transducer 1kW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | 2,500 |
Frequency (KHz) | 40-60 |
Beam Width (L/H) | 32°-21° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-15° Deadrise |
Part Number | A80045 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 M 12° 1KW FEATURES | |
Description | B175M Bronze Low Profile Through Hull 12 Degree Tilted Element Transducer 1kW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | 1,500 |
Frequency (KHz) | 80-130 |
Beam Width (L/H) | 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-15° Deadrise |
Part Number | A80046 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 H 12° 1KW FEATURES | |
Description | B175H Bronze Low Profile Through Hull 12 Degree Tilted Element Transducer 1kW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | 1,000 |
Frequency (KHz) | 130-210 |
Beam Width (L/H) | 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-15° Deadrise |
Part Number | A80047 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 L 20° 1KW FEATURES | |
Description | B175L Bronze Low Profile Through Hull 20 Degree Tilted Element Transducer 1kW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | 2,500 |
Frequency (KHz) | 40-60 |
Beam Width (L/H) | 32°-21° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 16-24° Deadrise |
Part Number | A80048 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 M 20° 1KW FEATURES | |
Description | B175M Bronze Low Profile Through Hull 20 Degree Tilted Element Transducer 1kW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | 2,500 |
Frequency (KHz) | 85-135 |
Beam Width (L/H) | 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 16-24° Deadrise |
Part Number | A80049 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 H 20° 1KW FEATURES | |
Description | B175H Bronze Low Profile Through Hull 20 Degree Tilted Element Transducer 1kW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | 1,000 |
Frequency (KHz) | 130-210 |
Beam Width (L/H) | 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 16-24° Deadrise |
Part Number | A80050 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). |
M265LH FEATURES | |
Description | 1KW Urethane In-Hull Transducer with In-Hull Mounting Kit |
Installation | In Hull |
Material | Urethane |
Power (RMS) | 1000W (1KW) |
Max Depth (Ft) | L: 3,000 / H: 1,000 |
Frequency (KHz) | L: 42-65 / H: 130-210 |
Beam Width (L/H) | L: 25°-16° / H: 10°-6° |
Records | Depth |
Approved Hull Material | Solid Fibreglass Only |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-30° Deadrise |
Part Number | A80012 |
Additional Notes |
M265LM FEATURES | |
Description | 1KW Urethane In-Hull Transducer with In-Hull Mounting Kit |
Installation | In Hull |
Material | Urethane |
Power (RMS) | 1000W (1KW) |
Max Depth (Ft) | L: 3,000 / H: 1,000 |
Frequency (KHz) | L: 42-65 / M: 85-135 |
Beam Width (L/M) | L: 25°-16° / M: 16°-11° |
Records | Depth |
Approved Hull Material | Solid Fibreglass Only |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-30° Deadrise |
Part Number | A80038 |
Additional Notes |
R111LH FEATURES | |
Description | R111LH 2kW Urethane High-Performance In-Hull Transducer |
Installation | In Hull |
Material | Urethane |
Power (RMS) | 2000W (2KW) |
Max Depth (Ft) | L: 6,000 / H: 1,500 |
Frequency (KHz) | L: 38-75 / H: 130-210 |
Beam Width (L/M) | L: 19°-10° / H: 8°-4° |
Records | Depth |
Approved Hull Material | Solid Fibreglass Only |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-22° Deadrise |
Part Number | A80133 |
Additional Notes |
R111LM FEATURES | |
Description | R111LM 2kW Urethane High-Performance In-Hull Transducer |
Installation | In Hull |
Material | Urethane |
Power (RMS) | 2000W (2KW) |
Max Depth (Ft) | L: 6,000 / M: 3,000 |
Frequency (KHz) | L: 38-75 / M: 80-130 |
Beam Width (L/M) | L: 19°-10° / M: 13°-8° |
Records | Depth |
Approved Hull Material | Solid Fibreglass Only |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-22° Deadrise |
Part Number | A80134 |
Additional Notes |
R599LH FEATURES | |
Description | R599LH 3kW Urethane High-Performance In-Hull Transducer |
Installation | In Hull |
Material | Urethane |
Power (RMS) | 3000W (3KW) |
Max Depth (Ft) | L: 10,000 / H: 1,500 |
Frequency (KHz) | L: 28-60 / H: 130-210 |
Beam Width (L/M) | L: 23°-9° / H: 8°-4° |
Records | Depth |
Approved Hull Material | Solid Fibreglass Only |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-22° Deadrise |
Part Number | A80212 |
Additional Notes |
R599LM FEATURES | |
Description | R599LM 3kW Urethane High-Performance In-Hull Transducer |
Installation | In Hull |
Material | Urethane |
Power (RMS) | 3000W (3KW) |
Max Depth (Ft) | L: 10,000 / M: 3,000 |
Frequency (KHz) | L: 28-60 / M: 80-130 |
Beam Width (L/M) | L: 23°-9° / M: 13°-8° |
Records | Depth |
Approved Hull Material | Solid Fibreglass Only |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-22° Deadrise |
Part Number | A80213 |
Additional Notes |
TM265 LH 1KW FEATURES | |
Description | TM265LH Urethane Transom Mount Transducer 1kW |
Installation | Transom Mount |
Material | Urethane |
Power (RMS) | 1KW |
Max Depth (Ft) | L:3,000 / H:1,000 |
Frequency (KHz) | L: 42-65 / H: 130-210 |
Beam Width (L/H) | L: 25°-16° / H: 10°-6° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood / Metal |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-25° Transom |
Part Number | A80013 |
Additional Notes |
TM265 LM 1KW FEATURES | |
Description | TM265LM Urethane Transom Mount Transducer 1kW |
Installation | Transom Mount |
Material | Urethane |
Power (RMS) | 1KW |
Max Depth (Ft) | L:3,000 / H:1,000 |
Frequency (KHz) | L: 42-65 / M: 85-135 |
Beam Width (L/H) | L: 25°-16° / M: 16°-11° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood / Metal |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-25° Transom |
Part Number | A80041 |
Additional Notes |
B265 LH 1KW FEATURES | |
Description | BEST SELLER! B265LH Bronze Thru-Hull Transducer with High-Speed Fairing 1KW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | L:3,000 / H:1,000 |
Frequency (KHz) | L: 42-65 / H: 130-210 |
Beam Width (L/H) | L: 25°-16° / H: 10°-6° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-20° Deadrise |
Part Number | A80010 |
Additional Notes | The B265LH is a solid choice for serious coastal and offshore fishing. |
B265 LM 1KW FEATURES | |
Description | BEST SELLER! B265LM Bronze Thru-Hull Transducer with High-Speed Fairing 1KW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | L:3,000 / H:1,000 |
Frequency (KHz) | L: 42-65 / M: 85-135 |
Beam Width (L/H) | L: 25°-16° / M: 16°-11° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-20° Deadrise |
Part Number | A80011 |
Additional Notes | The B265LH is a solid choice for serious coastal and offshore fishing. |
R109 LH 2KW FEATURES | |
Description | R109LH Urethane High-Performance Thru-Hull Transducer 2kW |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | 2KW |
Max Depth (Ft) | L: 6,000 / H: 1,500 |
Frequency (KHz) | L: 38-75 / H: 130-210 |
Beam Width (L/H) | L: 19°-10° / H: 8°-4° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood / Metal |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-25° Deadrise |
Part Number | A80039 |
Additional Notes |
R109 LM 2KW FEATURES | |
Description | R109LM Urethane High-Performance Thru-Hull Transducer 2kW |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | 2KW |
Max Depth (Ft) | L: 6,000 / H: 3,000 |
Frequency (KHz) | L: 38-75 / M: 80-130 |
Beam Width (L/H) | L: 19°-10° / M: 13°-8° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood / Metal |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-25° Deadrise |
Part Number | A80040 |
Additional Notes |
R509 LH 3KW FEATURES | |
Description | R509 LH Urethane Ultra High-Performance Thru-Hull Transducer 3kW |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | 3KW |
Max Depth (Ft) | L: 10,000 / H: 1,500 |
Frequency (KHz) | L: 28-60 / H: 130-210 |
Beam Width (L/H) | L: 23°-9° / H: 8°-4° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood / Metal |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-25° Deadrise |
Part Number | A80210 |
Additional Notes | Choose the R509LM for additional coverage in shallow water. |
R509 LM 3KW FEATURES | |
Description | R509 LM Urethane Ultra High-Performance Thru-Hull Transducer 3kW |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | 3KW |
Max Depth (Ft) | L: 10,000 / M: 3,000 |
Frequency (KHz) | L: 28-60 / M: 80-130 |
Beam Width (L/H) | L: 23°-9° / M: 13°-8° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood / Metal |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-25° Deadrise |
Part Number | A80211 |
Additional Notes | Choose the R509LM for additional coverage in shallow water. |
The following transducers have single elements so are sold in transducer pairs.
The B75's offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel.
Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds.
Pair two B75's together with the Paired CHIRP Transducer Y-Cable (A102146).
The B175's provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage.
Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds.
Pair two B175's together with the Paired CHIRP Transducer Y-Cable (A102146).
The B75's offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel.
Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds.
Pair two B75's together with the Paired CHIRP Transducer Y-Cable (A102146).
The B175's provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage.
Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds.
Pair two B175's together with the Paired CHIRP Transducer Y-Cable (A102146).
The B75's offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel.
Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds.
Pair two B75's together with the Paired CHIRP Transducer Y-Cable (A102146).
The B175's provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage.
Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds.
Pair two B175's together with the Paired CHIRP Transducer Y-Cable (A102146).
B75 LH 0° 600W FEATURES | |
Description | B75LH Bronze Low Profile Thru-Hull 0 Degree Tilted Element Transducer Pair 300W Low / 600W High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | 300 / 600W |
Max Depth (Ft) | L: 1,200 / H: 700 |
Frequency (KHz) | L: 40-75 / H: 130-210 |
Beam Width (L/H) | L: 32°-21° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | T70060 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75 LM 0° 600W FEATURES | |
Description | B75LM Bronze Low Profile Thru-Hull 0 Degree Tilted Element Transducer Pair 300W Low / 600W High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | 300 / 600W |
Max Depth (Ft) | L: 1,200 / M: 900 |
Frequency (KHz) | L: 40-75 / M: 80-130 |
Beam Width (L/H) | L: 32°-21° / M: 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | T70061 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75 MH 0° 600W FEATURES | |
Description | B75MH Bronze Low Profile Thru-Hull 0 Degree Tilted Element Transducer Pair 300W Low / 600W High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | M: 600W / H: 600W |
Max Depth (Ft) | M: 900 / H: 700 |
Frequency (KHz) | M: 80-130 / H: 130-210 |
Beam Width (L/H) | M: 24°-16° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | T70062 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175LH 1KW FEATURES | |
Description | B175LH Bronze Low Profile Thru-Hull 0 Degree Tilted Element Transducer Pair 1kW Low / 1kW High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | L: 1kW / H: 1kW |
Max Depth (Ft) | L: 2,500 / H: 1,000 |
Frequency (KHz) | L: 40-60 / H: 130-210 |
Beam Width (L/H) | L: 32°-21° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | T70069 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 LM 1KW FEATURES | |
Description | B175 LM Bronze Low Profile Thru-Hull 0 Degree Tilted Element Transducer Pair 1kW Low / 1kW High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | L: 1kW / M: 1kW |
Max Depth (Ft) | L: 2,500 / M: 1,500 |
Frequency (KHz) | L: 40-60 / M: 85-135 |
Beam Width (L/M) | L: 32°-21° / M: 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | T70070 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 MH 1KW FEATURES | |
Description | B175 MH Bronze Low Profile Thru-Hull 0 Degree Tilted Element Transducer Pair 1kW Low / 1kW High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | M: 1kW / M: 1kW |
Max Depth (Ft) | M: 1,500 / H: 1,000 |
Frequency (KHz) | M: 85-135 / H: 130-210 |
Beam Width (L/M) | M: 24°-16° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | T70071 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75 LH 12° 600W FEATURES | |
Description | B75LH Bronze Low Profile Thru-Hull 0 Degree Tilted Element Transducer Pair 300W Low / 600W High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | 300 / 600W |
Max Depth (Ft) | L: 1,200 / H: 700 |
Frequency (KHz) | L: 40-75 / H: 130-210 |
Beam Width (L/H) | L: 32°-21° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-15° Deadrise |
Part Number | T70063 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75 LM 12° 600W FEATURES | |
Description | B75LM Bronze Low Profile Thru-Hull 12 Degree Tilted Element Transducer Pair 300W Low / 600W High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | 300 / 600W |
Max Depth (Ft) | L: 1,200 / M: 900 |
Frequency (KHz) | L: 40-75 / M: 80-130 |
Beam Width (L/H) | L: 32°-21° / M: 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-12° Deadrise |
Part Number | T70064 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75 MH 12° 600W FEATURES | |
Description | B75MH Bronze Low Profile Thru-Hull 12 Degree Tilted Element Transducer Pair 300W Low / 600W High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | M: 600W / H: 600W |
Max Depth (Ft) | M: 900 / H: 700 |
Frequency (KHz) | M: 80-130 / H: 130-210 |
Beam Width (L/H) | M: 24°-16° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-15° Deadrise |
Part Number | T70065 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175LH 12° 1KW FEATURES | |
Description | B175LH Bronze Low Profile Thru-Hull 12 Degree Tilted Element Transducer Pair 1kW Low / 1kW High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | L: 1kW / H: 1kW |
Max Depth (Ft) | L: 2,500 / H: 1,000 |
Frequency (KHz) | L: 40-60 / H: 130-210 |
Beam Width (L/H) | L: 32°-21° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-15° Deadrise |
Part Number | T70072 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 12° LM 1KW FEATURES | |
Description | B175 LM Bronze Low Profile Thru-Hull 12 Degree Tilted Element Transducer Pair 1kW Low / 1kW High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | L: 1kW / M: 1kW |
Max Depth (Ft) | L: 2,500 / M: 1,500 |
Frequency (KHz) | L: 40-60 / M: 85-135 |
Beam Width (L/M) | L: 32°-21° / M: 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-15° Deadrise |
Part Number | T70073 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 MH 12° 1KW FEATURES | |
Description | B175 MH Bronze Low Profile Thru-Hull 12 Degree Tilted Element Transducer Pair 1kW Low / 1kW High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | M: 1kW / M: 1kW |
Max Depth (Ft) | M: 1,500 / H: 1,000 |
Frequency (KHz) | M: 85-135 / H: 130-210 |
Beam Width (L/M) | M: 24°-16° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-15° Deadrise |
Part Number | T70074 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75 MH 20° 600W FEATURES | |
Description | B75MH Bronze Low Profile Thru-Hull 20 Degree Tilted Element Transducer Pair 300W Low / 600W High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | M: 600W / H: 600W |
Max Depth (Ft) | M: 900 / H: 700 |
Frequency (KHz) | M: 80-130 / H: 130-210 |
Beam Width (L/H) | M: 24°-16° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 16-24° Deadrise |
Part Number | T70068 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175LH 20° 1KW FEATURES | |
Description | B175LH Bronze Low Profile Thru-Hull 20 Degree Tilted Element Transducer Pair 1kW Low / 1kW High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | L: 1kW / H: 1kW |
Max Depth (Ft) | L: 2,500 / H: 1,000 |
Frequency (KHz) | L: 40-60 / H: 130-210 |
Beam Width (L/H) | L: 32°-21° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 16-24° Deadrise |
Part Number | T70075 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 20° LM 1KW FEATURES | |
Description | B175 LM Bronze Low Profile Thru-Hull 20 Degree Tilted Element Transducer Pair 1kW Low / 1kW High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | L: 1kW / M: 1kW |
Max Depth (Ft) | L: 2,500 / M: 1,500 |
Frequency (KHz) | L: 40-60 / M: 85-135 |
Beam Width (L/M) | L: 32°-21° / M: 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 16-24° Deadrise |
Part Number | T70076 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 MH 20° 1KW FEATURES | |
Description | B175 MH Bronze Low Profile Thru-Hull 20 Degree Tilted Element Transducer Pair 1kW Low / 1kW High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | M: 1kW / M: 1kW |
Max Depth (Ft) | M: 1,500 / H: 1,000 |
Frequency (KHz) | M: 85-135 / H: 130-210 |
Beam Width (L/M) | M: 24°-16° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 16-24° Deadrise |
Part Number | T70077 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
3m
Data: Speed, Depth & Temperature
Part Number: A102148
5m
Data: Speed, Depth & Temperature
Part Number: A102150
10m
Data: Speed, Depth & Temperature
Part Number: A80327
Data: Depth & Temperature
Part Number: A102146
Part Number: A80328
Data: Speed & Temperature
Part Number: A80345
The following transducers have 2 elements within the one transducer.
The M265 is an outstanding in-hull option with 8 internal ceramics and up to 117kHz of total CHIRP range. The in-hull installation eliminates the need to drill any holes in the hull, while accommodating a large range of deadrise angles. The medium-frequency benefits include the ability to identify targets deeper than the high-frequency with benefit of a wider beam angle. The high frequency provides excellent shallow water resolution.
The R111 contains 16 internal ceramics to provide a level of sensitivity superior to the M265. This powerhouse of a transducer will provide excellent clarity and target resolution in water both shallow and deep. The wider beam angle of the medium frequency provides improved shallow water coverage.
The R599 is the ultimate in-hull transducer. Featuring 25 internal ceramics and a total potential output of 3kW, this transducer will outperform any other in-hull option.
The B75's offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel.
Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds.
Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75's together with the Paired CHIRP Transducer Y-Cable (A102146).
The B765 is a good coastal transducer. With up to 115kHz of CHIRP range this transducer covers a number of popular fishing frequencies. The result is good target separation in deep and shallow water alike.
The B175's provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage.
Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds.
Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146).
The B265 is a great CHIRP through-hull transducer. With 8 internal ceramics and up to 103kHz of total CHIRP range the B265LH is a solid choice for serious coastal and offshore fishing.
The TM265 brings CHIRP technology into a transom transducer. With up to 103kHz of CHIRP range and 8 internal ceramics this transducer has the ability to provide great target separation in both shallow and deep water. The medium element will provide better shallow water coverage under the vessel, while the high element will provide better shallow water resolution.
With 16 internal ceramics the R109 is a powerhouse transducer. The thru-hull design ensure maximum performance by putting nothing between the transducer and the water. The added beam width of the medium frequency provides additional visibility in shallower waters.
The R509 contains 25 internal ceramics to provide an unprecedented level of shallow and deep water sensitivity. Pairing this array of elements with the transducers maximum 3kW output and you truly have the best sport fishing transducer on the market. Choose the R509LM for additional coverage in shallow water.
B75L FEATURES | |
Description | B75L 300W Bronze Low Profile Through Hull 0 Degree Tilted Element Transducer |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 300W |
Max Depth (Ft) | 1,200 |
Frequency (KHz) | 40-75 |
Beam Width (L/M) | 32°-21° |
Records | Depth / Temperature |
Approved Hull Material | Solid Fibreglass Only |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | A80016 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75L 12° FEATURES | |
Description | B75L 300W Bronze Low Profile Through Hull 12 Degree Tilted Element Transducer |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 300W |
Max Depth (Ft) | 1,200 |
Frequency (KHz) | 40-75 |
Beam Width (L/M) | 32°-21° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-12° Deadrise |
Part Number | A80033 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75M FEATURES | |
Description | B75M 600W Bronze Low Profile Through Hull 0 Degree Tilted Element Transducer |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 600W |
Max Depth (Ft) | 900 |
Frequency (KHz) | 80-130 |
Beam Width (L/M) | 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | A80017 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75H FEATURES | |
Description | B75H 600W Bronze Low Profile Through Hull 0 Degree Tilted Element Transducer |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 600W |
Max Depth (Ft) | 900 |
Frequency (KHz) | 130-210 |
Beam Width (L/M) | 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | A80018 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75M 12° FEATURES | |
Description | B75M 600W Bronze Low Profile Through Hull 12 Degree Tilted Element Transducer |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 600W |
Max Depth (Ft) | 900 |
Frequency (KHz) | 80-130 |
Beam Width (L/M) | 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-15° Deadrise |
Part Number | A80034 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75H 12° FEATURES | |
Description | B75H 600W Bronze Low Profile Through Hull 12 Degree Tilted Element Transducer |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 600W |
Max Depth (Ft) | 900 |
Frequency (KHz) | 130-210 |
Beam Width (L/M) | 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-15° Deadrise |
Part Number | A80035 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75M 20° FEATURES | |
Description | B75M 600W Bronze Low Profile Through Hull 20 Degree Tilted Element Transducer |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 600W |
Max Depth (Ft) | L: 900 |
Frequency (KHz) | 80-130 |
Beam Width (L/M) | 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 16-24° Deadrise |
Part Number | A80036 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75H 20° FEATURES | |
Description | B75H 600W Bronze Low Profile Through Hull 20 Degree Tilted Element Transducer |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 600W |
Max Depth (Ft) | 700 |
Frequency (KHz) | 130-210 |
Beam Width (L/M) | 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 16-24° Deadrise |
Part Number | A80037 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B765 LH 600W FEATURES | |
Description | B765 LH Bronze Through Hull Transducer with High-Speed Fairing 300W Low / 600W High |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | L:300 / H:600W |
Max Depth (Ft) | L:1,200 / H:700 |
Frequency (KHz) | L:40-75 / H:80-130 |
Beam Width (L/H) | L:32°-21° / H:15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-24° Deadrise |
Part Number | A80014 |
Additional Notes | The B765 is a good coastal transducer. With up to 115kHz of CHIRP range this transducer covers a number of popular fishing frequencies. The result is good target separation in deep and shallow water alike. |
B765 LM 600W FEATURES | |
Description | B765 LM Bronze Through Hull Transducer with High-Speed Fairing 300W Low / 600W Medium |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | L:300 / M:600W |
Max Depth (Ft) | L:1,200 / M:700 |
Frequency (KHz) | L:40-75 / M:80-130 |
Beam Width (L/H) | L:32°-21° / M:24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-24° Deadrise |
Part Number | A80015 |
Additional Notes | The B765 is a good coastal transducer. With up to 115kHz of CHIRP range this transducer covers a number of popular fishing frequencies. The result is good target separation in deep and shallow water alike. |
B175 L 1KW FEATURES | |
Description | B175L Bronze Low Profile Through Hull 0 Degree Tilted Element Transducer 1kW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | 2,500 |
Frequency (KHz) | 40-60 |
Beam Width (L/H) | 32°-21° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | A80042 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 M 1KW FEATURES | |
Description | B175M Bronze Low Profile Through Hull 0 Degree Tilted Element Transducer 1kW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | 1,500 |
Frequency (KHz) | 80-130 |
Beam Width (L/H) | 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | A80043 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 H 1KW FEATURES | |
Description | B175H Bronze Low Profile Through Hull 0 Degree Tilted Element Transducer 1kW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | 1,000 |
Frequency (KHz) | 130-210 |
Beam Width (L/H) | 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | A80044 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 L 12° 1KW FEATURES | |
Description | B175L Bronze Low Profile Through Hull 12 Degree Tilted Element Transducer 1kW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | 2,500 |
Frequency (KHz) | 40-60 |
Beam Width (L/H) | 32°-21° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-15° Deadrise |
Part Number | A80045 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 M 12° 1KW FEATURES | |
Description | B175M Bronze Low Profile Through Hull 12 Degree Tilted Element Transducer 1kW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | 1,500 |
Frequency (KHz) | 80-130 |
Beam Width (L/H) | 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-15° Deadrise |
Part Number | A80046 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 H 12° 1KW FEATURES | |
Description | B175H Bronze Low Profile Through Hull 12 Degree Tilted Element Transducer 1kW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | 1,000 |
Frequency (KHz) | 130-210 |
Beam Width (L/H) | 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-15° Deadrise |
Part Number | A80047 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 L 20° 1KW FEATURES | |
Description | B175L Bronze Low Profile Through Hull 20 Degree Tilted Element Transducer 1kW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | 2,500 |
Frequency (KHz) | 40-60 |
Beam Width (L/H) | 32°-21° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 16-24° Deadrise |
Part Number | A80048 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 M 20° 1KW FEATURES | |
Description | B175M Bronze Low Profile Through Hull 20 Degree Tilted Element Transducer 1kW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | 2,500 |
Frequency (KHz) | 85-135 |
Beam Width (L/H) | 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 16-24° Deadrise |
Part Number | A80049 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 H 20° 1KW FEATURES | |
Description | B175H Bronze Low Profile Through Hull 20 Degree Tilted Element Transducer 1kW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | 1,000 |
Frequency (KHz) | 130-210 |
Beam Width (L/H) | 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 16-24° Deadrise |
Part Number | A80050 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). |
M265LH FEATURES | |
Description | 1KW Urethane In-Hull Transducer with In-Hull Mounting Kit |
Installation | In Hull |
Material | Urethane |
Power (RMS) | 1000W (1KW) |
Max Depth (Ft) | L: 3,000 / H: 1,000 |
Frequency (KHz) | L: 42-65 / H: 130-210 |
Beam Width (L/H) | L: 25°-16° / H: 10°-6° |
Records | Depth |
Approved Hull Material | Solid Fibreglass Only |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-30° Deadrise |
Part Number | A80012 |
Additional Notes |
M265LM FEATURES | |
Description | 1KW Urethane In-Hull Transducer with In-Hull Mounting Kit |
Installation | In Hull |
Material | Urethane |
Power (RMS) | 1000W (1KW) |
Max Depth (Ft) | L: 3,000 / H: 1,000 |
Frequency (KHz) | L: 42-65 / M: 85-135 |
Beam Width (L/M) | L: 25°-16° / M: 16°-11° |
Records | Depth |
Approved Hull Material | Solid Fibreglass Only |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-30° Deadrise |
Part Number | A80038 |
Additional Notes |
R111LH FEATURES | |
Description | R111LH 2kW Urethane High-Performance In-Hull Transducer |
Installation | In Hull |
Material | Urethane |
Power (RMS) | 2000W (2KW) |
Max Depth (Ft) | L: 6,000 / H: 1,500 |
Frequency (KHz) | L: 38-75 / H: 130-210 |
Beam Width (L/M) | L: 19°-10° / H: 8°-4° |
Records | Depth |
Approved Hull Material | Solid Fibreglass Only |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-22° Deadrise |
Part Number | A80133 |
Additional Notes |
R111LM FEATURES | |
Description | R111LM 2kW Urethane High-Performance In-Hull Transducer |
Installation | In Hull |
Material | Urethane |
Power (RMS) | 2000W (2KW) |
Max Depth (Ft) | L: 6,000 / M: 3,000 |
Frequency (KHz) | L: 38-75 / M: 80-130 |
Beam Width (L/M) | L: 19°-10° / M: 13°-8° |
Records | Depth |
Approved Hull Material | Solid Fibreglass Only |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-22° Deadrise |
Part Number | A80134 |
Additional Notes |
R599LH FEATURES | |
Description | R599LH 3kW Urethane High-Performance In-Hull Transducer |
Installation | In Hull |
Material | Urethane |
Power (RMS) | 3000W (3KW) |
Max Depth (Ft) | L: 10,000 / H: 1,500 |
Frequency (KHz) | L: 28-60 / H: 130-210 |
Beam Width (L/M) | L: 23°-9° / H: 8°-4° |
Records | Depth |
Approved Hull Material | Solid Fibreglass Only |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-22° Deadrise |
Part Number | A80212 |
Additional Notes |
R599LM FEATURES | |
Description | R599LM 3kW Urethane High-Performance In-Hull Transducer |
Installation | In Hull |
Material | Urethane |
Power (RMS) | 3000W (3KW) |
Max Depth (Ft) | L: 10,000 / M: 3,000 |
Frequency (KHz) | L: 28-60 / M: 80-130 |
Beam Width (L/M) | L: 23°-9° / M: 13°-8° |
Records | Depth |
Approved Hull Material | Solid Fibreglass Only |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-22° Deadrise |
Part Number | A80213 |
Additional Notes |
TM265 LH 1KW FEATURES | |
Description | TM265LH Urethane Transom Mount Transducer 1kW |
Installation | Transom Mount |
Material | Urethane |
Power (RMS) | 1KW |
Max Depth (Ft) | L:3,000 / H:1,000 |
Frequency (KHz) | L: 42-65 / H: 130-210 |
Beam Width (L/H) | L: 25°-16° / H: 10°-6° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood / Metal |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-25° Transom |
Part Number | A80013 |
Additional Notes |
TM265 LM 1KW FEATURES | |
Description | TM265LM Urethane Transom Mount Transducer 1kW |
Installation | Transom Mount |
Material | Urethane |
Power (RMS) | 1KW |
Max Depth (Ft) | L:3,000 / H:1,000 |
Frequency (KHz) | L: 42-65 / M: 85-135 |
Beam Width (L/H) | L: 25°-16° / M: 16°-11° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood / Metal |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-25° Transom |
Part Number | A80041 |
Additional Notes |
B265 LH 1KW FEATURES | |
Description | BEST SELLER! B265LH Bronze Thru-Hull Transducer with High-Speed Fairing 1KW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | L:3,000 / H:1,000 |
Frequency (KHz) | L: 42-65 / H: 130-210 |
Beam Width (L/H) | L: 25°-16° / H: 10°-6° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-20° Deadrise |
Part Number | A80010 |
Additional Notes | The B265LH is a solid choice for serious coastal and offshore fishing. |
B265 LM 1KW FEATURES | |
Description | BEST SELLER! B265LM Bronze Thru-Hull Transducer with High-Speed Fairing 1KW |
Installation | Through Hull |
Material | Bronze |
Power (RMS) | 1KW |
Max Depth (Ft) | L:3,000 / H:1,000 |
Frequency (KHz) | L: 42-65 / M: 85-135 |
Beam Width (L/H) | L: 25°-16° / M: 16°-11° |
Records | Depth / Temperature |
Approved Hull Material | Fibreglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-20° Deadrise |
Part Number | A80011 |
Additional Notes | The B265LH is a solid choice for serious coastal and offshore fishing. |
R109 LH 2KW FEATURES | |
Description | R109LH Urethane High-Performance Thru-Hull Transducer 2kW |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | 2KW |
Max Depth (Ft) | L: 6,000 / H: 1,500 |
Frequency (KHz) | L: 38-75 / H: 130-210 |
Beam Width (L/H) | L: 19°-10° / H: 8°-4° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood / Metal |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-25° Deadrise |
Part Number | A80039 |
Additional Notes |
R109 LM 2KW FEATURES | |
Description | R109LM Urethane High-Performance Thru-Hull Transducer 2kW |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | 2KW |
Max Depth (Ft) | L: 6,000 / H: 3,000 |
Frequency (KHz) | L: 38-75 / M: 80-130 |
Beam Width (L/H) | L: 19°-10° / M: 13°-8° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood / Metal |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-25° Deadrise |
Part Number | A80040 |
Additional Notes |
R509 LH 3KW FEATURES | |
Description | R509 LH Urethane Ultra High-Performance Thru-Hull Transducer 3kW |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | 3KW |
Max Depth (Ft) | L: 10,000 / H: 1,500 |
Frequency (KHz) | L: 28-60 / H: 130-210 |
Beam Width (L/H) | L: 23°-9° / H: 8°-4° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood / Metal |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-25° Deadrise |
Part Number | A80210 |
Additional Notes | Choose the R509LM for additional coverage in shallow water. |
R509 LM 3KW FEATURES | |
Description | R509 LM Urethane Ultra High-Performance Thru-Hull Transducer 3kW |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | 3KW |
Max Depth (Ft) | L: 10,000 / M: 3,000 |
Frequency (KHz) | L: 28-60 / M: 80-130 |
Beam Width (L/H) | L: 23°-9° / M: 13°-8° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood / Metal |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-25° Deadrise |
Part Number | A80211 |
Additional Notes | Choose the R509LM for additional coverage in shallow water. |
The following transducers have single elements so are sold in transducer pairs.
The B75's offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel.
Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds.
Pair two B75's together with the Paired CHIRP Transducer Y-Cable (A102146).
The B175's provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage.
Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds.
Pair two B175's together with the Paired CHIRP Transducer Y-Cable (A102146).
The B75's offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel.
Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds.
Pair two B75's together with the Paired CHIRP Transducer Y-Cable (A102146).
The B175's provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage.
Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds.
Pair two B175's together with the Paired CHIRP Transducer Y-Cable (A102146).
The B75's offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel.
Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds.
Pair two B75's together with the Paired CHIRP Transducer Y-Cable (A102146).
The B175's provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage.
Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds.
Pair two B175's together with the Paired CHIRP Transducer Y-Cable (A102146).
B75 LH 0° 600W FEATURES | |
Description | B75LH Bronze Low Profile Thru-Hull 0 Degree Tilted Element Transducer Pair 300W Low / 600W High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | 300 / 600W |
Max Depth (Ft) | L: 1,200 / H: 700 |
Frequency (KHz) | L: 40-75 / H: 130-210 |
Beam Width (L/H) | L: 32°-21° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | T70060 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75 LM 0° 600W FEATURES | |
Description | B75LM Bronze Low Profile Thru-Hull 0 Degree Tilted Element Transducer Pair 300W Low / 600W High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | 300 / 600W |
Max Depth (Ft) | L: 1,200 / M: 900 |
Frequency (KHz) | L: 40-75 / M: 80-130 |
Beam Width (L/H) | L: 32°-21° / M: 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | T70061 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75 MH 0° 600W FEATURES | |
Description | B75MH Bronze Low Profile Thru-Hull 0 Degree Tilted Element Transducer Pair 300W Low / 600W High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | M: 600W / H: 600W |
Max Depth (Ft) | M: 900 / H: 700 |
Frequency (KHz) | M: 80-130 / H: 130-210 |
Beam Width (L/H) | M: 24°-16° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | T70062 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175LH 1KW FEATURES | |
Description | B175LH Bronze Low Profile Thru-Hull 0 Degree Tilted Element Transducer Pair 1kW Low / 1kW High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | L: 1kW / H: 1kW |
Max Depth (Ft) | L: 2,500 / H: 1,000 |
Frequency (KHz) | L: 40-60 / H: 130-210 |
Beam Width (L/H) | L: 32°-21° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | T70069 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 LM 1KW FEATURES | |
Description | B175 LM Bronze Low Profile Thru-Hull 0 Degree Tilted Element Transducer Pair 1kW Low / 1kW High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | L: 1kW / M: 1kW |
Max Depth (Ft) | L: 2,500 / M: 1,500 |
Frequency (KHz) | L: 40-60 / M: 85-135 |
Beam Width (L/M) | L: 32°-21° / M: 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | T70070 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 MH 1KW FEATURES | |
Description | B175 MH Bronze Low Profile Thru-Hull 0 Degree Tilted Element Transducer Pair 1kW Low / 1kW High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | M: 1kW / M: 1kW |
Max Depth (Ft) | M: 1,500 / H: 1,000 |
Frequency (KHz) | M: 85-135 / H: 130-210 |
Beam Width (L/M) | M: 24°-16° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 0-7° Deadrise |
Part Number | T70071 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75 LH 12° 600W FEATURES | |
Description | B75LH Bronze Low Profile Thru-Hull 0 Degree Tilted Element Transducer Pair 300W Low / 600W High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | 300 / 600W |
Max Depth (Ft) | L: 1,200 / H: 700 |
Frequency (KHz) | L: 40-75 / H: 130-210 |
Beam Width (L/H) | L: 32°-21° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-15° Deadrise |
Part Number | T70063 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75 LM 12° 600W FEATURES | |
Description | B75LM Bronze Low Profile Thru-Hull 12 Degree Tilted Element Transducer Pair 300W Low / 600W High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | 300 / 600W |
Max Depth (Ft) | L: 1,200 / M: 900 |
Frequency (KHz) | L: 40-75 / M: 80-130 |
Beam Width (L/H) | L: 32°-21° / M: 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-12° Deadrise |
Part Number | T70064 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75 MH 12° 600W FEATURES | |
Description | B75MH Bronze Low Profile Thru-Hull 12 Degree Tilted Element Transducer Pair 300W Low / 600W High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | M: 600W / H: 600W |
Max Depth (Ft) | M: 900 / H: 700 |
Frequency (KHz) | M: 80-130 / H: 130-210 |
Beam Width (L/H) | M: 24°-16° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-15° Deadrise |
Part Number | T70065 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175LH 12° 1KW FEATURES | |
Description | B175LH Bronze Low Profile Thru-Hull 12 Degree Tilted Element Transducer Pair 1kW Low / 1kW High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | L: 1kW / H: 1kW |
Max Depth (Ft) | L: 2,500 / H: 1,000 |
Frequency (KHz) | L: 40-60 / H: 130-210 |
Beam Width (L/H) | L: 32°-21° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-15° Deadrise |
Part Number | T70072 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 12° LM 1KW FEATURES | |
Description | B175 LM Bronze Low Profile Thru-Hull 12 Degree Tilted Element Transducer Pair 1kW Low / 1kW High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | L: 1kW / M: 1kW |
Max Depth (Ft) | L: 2,500 / M: 1,500 |
Frequency (KHz) | L: 40-60 / M: 85-135 |
Beam Width (L/M) | L: 32°-21° / M: 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-15° Deadrise |
Part Number | T70073 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 MH 12° 1KW FEATURES | |
Description | B175 MH Bronze Low Profile Thru-Hull 12 Degree Tilted Element Transducer Pair 1kW Low / 1kW High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | M: 1kW / M: 1kW |
Max Depth (Ft) | M: 1,500 / H: 1,000 |
Frequency (KHz) | M: 85-135 / H: 130-210 |
Beam Width (L/M) | M: 24°-16° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 8-15° Deadrise |
Part Number | T70074 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B75 MH 20° 600W FEATURES | |
Description | B75MH Bronze Low Profile Thru-Hull 20 Degree Tilted Element Transducer Pair 300W Low / 600W High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | M: 600W / H: 600W |
Max Depth (Ft) | M: 900 / H: 700 |
Frequency (KHz) | M: 80-130 / H: 130-210 |
Beam Width (L/H) | M: 24°-16° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 16-24° Deadrise |
Part Number | T70068 |
Additional Notes | Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175LH 20° 1KW FEATURES | |
Description | B175LH Bronze Low Profile Thru-Hull 20 Degree Tilted Element Transducer Pair 1kW Low / 1kW High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | L: 1kW / H: 1kW |
Max Depth (Ft) | L: 2,500 / H: 1,000 |
Frequency (KHz) | L: 40-60 / H: 130-210 |
Beam Width (L/H) | L: 32°-21° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 16-24° Deadrise |
Part Number | T70075 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 20° LM 1KW FEATURES | |
Description | B175 LM Bronze Low Profile Thru-Hull 20 Degree Tilted Element Transducer Pair 1kW Low / 1kW High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | L: 1kW / M: 1kW |
Max Depth (Ft) | L: 2,500 / M: 1,500 |
Frequency (KHz) | L: 40-60 / M: 85-135 |
Beam Width (L/M) | L: 32°-21° / M: 24°-16° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 16-24° Deadrise |
Part Number | T70076 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
B175 MH 20° 1KW FEATURES | |
Description | B175 MH Bronze Low Profile Thru-Hull 20 Degree Tilted Element Transducer Pair 1kW Low / 1kW High |
Installation | Through Hull |
Material | Urethane |
Power (RMS) | M: 1kW / M: 1kW |
Max Depth (Ft) | M: 1,500 / H: 1,000 |
Frequency (KHz) | M: 85-135 / H: 130-210 |
Beam Width (L/M) | M: 24°-16° / H: 15°-9° |
Records | Depth / Temperature |
Approved Hull Material | Fiberglass / Wood |
Cable Length (Ft/M) | 33ft / 10m |
Supported Deadrise / Transom Angles | 16-24° Deadrise |
Part Number | T70077 |
Additional Notes | Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). |
3m
Data: Speed, Depth & Temperature
Part Number: A102148
5m
Data: Speed, Depth & Temperature
Part Number: A102150
10m
Data: Speed, Depth & Temperature
Part Number: A80327
Data: Depth & Temperature
Part Number: A102146
Part Number: A80328
Data: Speed & Temperature
Part Number: A80345
2018 © FLIR Systems All rights reserved. Privacy Policy|Copyright Policy|Terms of Use