Select the software update depending on which Multifunction Display (MFD) you will be using to perform the Remote Update.
Warning - a/c/e/eS/gS Series - Updating via a/c/e/eS/gS Series display. MFD software must be at level v13.37 and above.
Warning - G Series - Updating via G Series system. System software must be at level v4.49 and above.
Info - AXIOM and a/c/e/eS/gS Download - This download now contains multiple product updates including software for the Digital Open Array Radars.
Firmware update processes are done at your own risk. Before initiating the update process be sure to backup and make copies of all important files.
If the firmware process is interrupted your product may not function properly, therefore do not interrupt the process and ensure the unit is on a reliable power supply. Damage caused by incomplete upgrades will not be covered by Raymarine warranty.
By Downloading the software, you agree to these terms.
v3.00 Mod Boot
This FAQ relates to the following products:
The Quantum, CP100, CP200, CP370, CP470 & CP570 can be upgraded via any of the following Multifunction Displays (MFD):
Note: microSD memory cards used with a/c/e/eS/gS Series MFDs should have a memory capacity of no less than 512MB and no more than 32GB.
Note: To avoid potentially corrupting the data on your Navionics chart card, DO NOT copy software update files to your Navionics chart card and DO NOT back up waypoint/route/track data to your Navionics chart card. MicroSD cards are commonly available in most stores selling consumer electronics products. Waypoint, route, track data, and system configuration data can be stored on a microSD memory card which also contains software update files.
The Radar, SONAR module software is now part of the latest a, c, e, eS, gS Series Multifunction Display (MFD) software download. It contains the following peripherals:
Once the Master MFD has updated, any connected MFD or peripheral will be updated as well.
If you have performed the MFD update recently you may not need to perform this update. Please check if you require the update.
The MFD's and peripherals software version may be verified via the command sequence:
[Homescreen] > Setup > Maintenance > Diagnostics > Select Device
If you have issues performing the software update please contact your local Raymarine agent who will be able to assist.