It appears that you are within the United States, if this is not correct please select the correct location from the options below

EV-2 Sensor Core

Evolution autopilot sensor core for vessels with drive-by-wire steering

Product Options
EV-2 Sensor Core

Designed for drive-by-wire Steering Systems

The EV-2 is designed for the latest drive-by-wire steering systems. The intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing. Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards. Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions. Auto-compensation for on board magnetic fields and reliable heading accuracy in the northern and southern extremes. Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays.

EV-2 Autopilot Sensor Core

The EV-2 Sensor Core is included with select drive-by-wire autopilot bundle packs.

Evolution EV-2 sensor core for drive-by-wire steering systems SKU: E70097

Evolution EV-2 sensor core for drive-by-wire steering systems


EV-2 Sensor Resources

Environmental
Relative humidity

Max. 93%

Waterproof rating

IPx6

Storage temperature

-30 °C to +70 °C (-22 °F to 158 °F)

Operating temperature

-25 °C to +55 °C (-13 °F to 131 °F)

Conformance
Standards

Europe: 2004/108/EC, Australia and New Zealand: C-Tick, Compliance Level 2

Physical
Dimensions

Diameter: 140 mm (5.5 in), Depth (including mounting enclosure): 35 mm (1.4 in), Depth (including wall bracket): 95 mm (3.8 in)

Sensors

3-axis digital accelerometer, 3-axis digital compass, 3-axis gyro digital angular rate sensor

Weight

0.29 kg (0.64 lbs)

Power
Nominal supply voltage

12 V dc

Operating voltage range

10.8 V dc to 15.6 V dc

Power consumption

30 mA

LEN (NMEA 2000 Load Equivalency Number)

1

What's in the box illustration
What's in the box?


1

Mounting trim

2

EV unit

3

Sealing ring

4

Mounting tray

5

Sealing ring

6

Wall mounting bracket

7

Screws for deck or bracket mounting

8

Screws for wall bracket

9

Documentation

10

SeaTalkng spur cable 1 m (33 ft)