It appears that you are within the United States, if this is not correct please select the correct location from the options below

YachtSense Low Power Module

The Low power module provides 4 x 10 A output channels.

Product Options
YachtSense Low Power Module
Motorboat helm with Raymarine Chartplotters

Key Features

The Low power module is a digital  output module and can be used to drive lower powered electrical loads such as lights, wipers motors and other electronic devices. The Low Power module supports up to 4 devices.

Channel capabilities:

  • Up to 10 A draw per channel
  • Load current measurement
  • Over current protection
  • Under current detection
  • Soft fuse
  • Voltage detection

Output options:

  • Controls 4 circuits up for 10 amps each
  • Fully dimmable for all types of lights
  • Soft start and stop capable
  • 3 layers of redundancy on all circuits

YachtSense Low Power Module

Low Power Module SKU: E70594

Low Power Module

YachtSense Low Power Module Resources

Power Specification
Nominal supply voltage

12 V dc / 24 V dc

Operating voltage range

8 V dc to 32 V dc

Maximum output current

40 A (10 A per channel)

Minimum output current

50 mA

Data Connections
Lo power connections

4 x 10 A output channels

Module communications

Internal 6–pin connection

Physical Data
Module Dimensions: H/W/D (not including busbars)

172 mm (6.77 in) x 28.00 mm (1.10 in) x 76.50 mm (3.01 in)


0.27 Kg (0.60 lb)

What's in the box?


Input or output modules (All modules are Supplied fitted with Molex connector(s) Output modules are supplied with fuses fitted).



Getting started

If you are a boat builder or system integrator working with a boat builder, Raymarine YachtSense experts can partner with your engineering team to design a YachtSense system. To connect with a YachtSense expert contact us today.