It appears that you are within the United States, if this is not correct please select the correct location from the options below

RV-200 Series Transducers

RealVision Bronze Through Hull Transducers & Pairs for Axiom+ RV, Axiom Pro & RVX-1000 sonars

Product Options
RV-200 Series Transducers

RV-200 Overview

Raymarine’s RV-200 Bronze All-In-One Through Hull Transducer is designed for inboard and outboard powerboats. The RV-200 lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.

The RV-200 is a 4-channel, Wide Spectrum CHIRP transducer with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes 3D sonar imagery, automatically compensating for vessel motion. You’ll enjoy an accurate and life-like model of the underwater environment that filters out distortions caused by waves, swells, or vessel maneuvering.  The RV-200 also has a built-in fast response water temperature sensor for quick, accurate readings.

The RV-200 features a rugged cast-bronze through hull body suitable for fiberglass or wooden hulls. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-200 works great on trailered boats too, and with no fairing block to cut, installation is a breeze.

RV-200 Models


RV-200 Transducer SKU: A80465

RV-200 Transducer


  • 0° Offset

  • Bronze

  • Through Hull Mount

  • RealVision 3D

  • 8-Meter Extension Cable

RV-212 Transducer Pack SKU: T70318

RV-212 Transducer Pack


  • 12° Offset

  • Bronze

  • Through Hull Mount

  • RealVision 3D

  • 8-Meter Extension Cable

  • 2-Meter Y-Cable

RV-212S (Starboard) Transducer SKU: A80467

RV-212S (Starboard) Transducer


  • 12° Offset

  • Bronze

  • Through Hull Mount

  • RealVision 3D

  • 2-Meter Extension Cable

RV-220 Transducer Pack SKU: T70319

RV-220 Transducer Pack


  • 20° Offset

  • Bronze

  • Through Hull Mount

  • RealVision 3D

  • 8-Meter Extension Cable

  • 2-Meter Y-Cable

RV-220P (Port) Transducer SKU: A80468

RV-220P (Port) Transducer


  • 20° Offset

  • Bronze

  • Through Hull Mount

  • RealVision 3D

  • 2-Meter Extension Cable

RV-220S (Starboard) Transducer SKU: A80469

RV-220S (Starboard) Transducer


  • 20° Offset

  • Bronze

  • Through Hull Mount

  • RealVision 3D

  • 2-Meter Extension Cable

RV-200 Series Transducers Resources

Physical
Cable length

RV-200: 8 m (26.2 ft), RV-2xxP/S: 2 m (6.5 ft)

Dimensions

Length: 308.00 mm (12.13 in), Width: 105.30 mm, Height: 166.00 mm (6.65 in) including cable bend radius

Weight

2.588 kg (5.7 lb)

Environmental
Waterproof rating

IPx6 (surfaces exterior to hull only), IPx7, IPx8

Storage temperature range

-20° C (23° F) to + 70° C (158° F)

Operating temperature range

-2° C (28.4° F) to + 55° C (131° F)

Conformance
Standards

EN 60945:2002, IEC 28846:1993, EMC Directive 2014/30/EU, Australia and New Zealand: C-Tick, Compliance Level 2

RealVision 3D sonar
Range

CHIRP sonar = 0.6 M (2 ft) to 274 m (900 ft), DownVision = 0.6 M (2 ft) to 183 m (600 ft), SideVision = 0.6 M (2 ft) to 91 m (300 ft), RealVision 3D = 0.6 M (2 ft) to 91 m (300 ft)

Channels

1 x CHIRP sonar, 1 x DownVision, 1 x SideVision, 1 x RealVision 3D

What's in the box?


1

Documentation

2

Locking collar kit (for transducer cable connector), consisting of: 2 x Split rings (includes spare), 1 x O-ring, 1 x Locking collar, 1 x Split ring fitting tool

3

Bronze hull nut

4

Cable protector

5

Nut for Anti-rotation bolt

6

Large internal isolator sleeve

7

Washer for Anti-rotation bolt

8

Rubber washer

9

Transducer (including cable)

10

Anti-rotation bolt

11

Protective cap for Anti-rotation bolt