Compact auxiliary helm controllers providing precision power steering functionality for Evolution power boat autopilots
Raymarine’s Follow-On Tiller controller brings power steering to remote and secondary control stations anywhere onboard. The Follow-On Tiller is a simple add-on control unit for Raymarine Evolution autopilot systems and is designed for power cruising yachts or commercial vessels. With a single button press, the tiller activates Evolution’s Power Steer mode, enabling captains to send precise steering angle commands to the rudder up to 35°.
Follow On Tiller controllers are available in 2 different models with slightly different modes of operation.
The controller supports both Follow-Up and Non-Follow up modes for maximum flexibility. The controller comes pre-fitted with a return spring to bring the controller back to the 0° center position automatically upon release. The return spring can be removed if desired.
In Follow-Up-Mode the rudder follows the tiller precisely. When the tiller is released or set to 0° the rudder is set to amidships. In Non-Follow-Up mode, the rudder remains at the angle set when the controller is released or set to 0° and requires the operator to manually correct to amidships.
Choose between Standby-Power Steer-Standby operation, or Auto-Power Steer-Auto operation.
£695.00
Price includes VAT
Standby-Power Steer-Standby Variant
Compatible with Evolution powerboat autopilots only
Install controllers in up to 4 steering locations using SeaTalkng networking
£695.00
Price includes VAT
Auto-Power Steer-Auto Variant
Compatible with Evolution powerboat autopilots only
Install controllers in up to 4 steering locations using SeaTalkng networking
| Data connections | |
|---|---|
| Supported connection protocols | SeaTalkng, NMEA 2000 (via DeviceNet adaptor) |
| Environmental | |
|---|---|
| Relative humidity | Max. 93% |
| Relative humidity | Max. 93% |
| Waterproof rating | IPx6, IPx7 |
| Waterproof rating | IPx6, IPx7 |
| Storage temperature | -30 °C to +70 °C (-22 °F to 158 °F) |
| Storage temperature | 30 °C to +70 °C (-22 °F to 158 °F) |
| Operating temperature | -25° C to +55° C (-13° F to 131° F) |
| Operating temperature | -25 °C to +55 °C (-13 °F to 131 °F) |
| Physical | |
|---|---|
| Dimensions | Length: 133 mm (5.24 in), Width: 55 mm (2.17 in), Depth: 32.5 mm (1.28 in) |
| Dimensions | Height: 55 mm (2.17 in), Width: 133 mm (5.24 in), Depth: 65.2 mm (2.57 in) |
| Connections | 1x SeaTalkng, or NMEA 2000 (via adapter) |
| Power | |
|---|---|
| Operating voltage range | 9 V dc to 16 V dc (protected up to 32 V dc) |
| Operating voltage range | 9 V dc to 16 V dc (protected up to 32 V dc) |
| Power consumption | 30 mA max. |
| Power consumption | 30 mA max. |
| Nominal supply voltage | 12 V dc (supplied by SeaTalkng) |
| Nominal supply voltage | 12 V dc (Supplied by SeaTalkng) |
| LEN (NMEA 2000 Load Equivalency Number) | 1 |
| LEN (NMEA 2000 Load Equivalency Number) | 1 |
| 1 | Follow on Tiller (Standby) |
| 1 | Follow on Tiller (Auto) |
| 2 | Keypad |
| 2 | Keypad |
| 3 | Mounting gasket |
| 3 | Mounting gasket |
| 4 | 1 m (3.28 ft) SeaTalkng elbow spur to SeaTalkng straight (White) cable |
| 4 | 1 m (3.28 ft) SeaTalkng elbow spur to SeaTalkng straight (White) cable |
| 5 | M3 x 5mm Button Head Socket Screw and M3 Washer (used for unsprung control) |
| 5 | M3 x 5mm Button Head Socket Screw and M3 Washer (used for unsprung control) |
| 6 | Mounting fixings x4 |
| 6 | Mounting fixings x4 |
| 7 | Rotary Lever |
| 7 | Rotary Lever |
| 8 | Documentation |
| 8 | Documentation |
