ITC-5 Transducer Converter

The Raymarine iTC-5 converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalk NG.

Product Options
ITC-5 Transducer Converter

Convert transducer signals to SeaTalkNG with ease

The Raymarine iTC-5 converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalkNG

Transducers for Speed/Temperature, Depth, Wind and Rudder Angle can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods.

iTC-5 Key Features

  • Extended SeaTalkNG systems can support multiple iTC-5 units.
  • SeaTalkNG connections at the base of the unit simply connect the iTC-5 unit into the SeaTalkNG backbone.
  • Please note the ST40/i40/i50/i60 and ST60+ displays cannot calibrate the iTC-5. Only the i70 has full transducer calibration. The ST70/ST70+ can calibrate the Depth, Wind and Speed/Temp transducers (not Rudder or Compass).
  • If you don't have an ST70/ST70+ or i70 in your system, then the ST40/i40/i50/i60/ST60+ displays must be interfaced directly to the relevant analogue transducers


iTC-5 Instrument Transducer Converter


iTC-5 Instrument Transducer Converter

SKU: E70010
iTC-5 Instrument Transducer Converter
  • Converts analogue transducer signals used in i70, ST70+ and ST70 instruments

iTC-5 Analogue Txd to NMEA Converter Resources

Power
Power consumption

Typical: 1.5 W

Operating voltage range

9 - 16 V dc

Nominal supply voltage

12 V dc

Current

< 150 mA peak operating current

LEN (NMEA 2000 Load Equivalency Number)

3

Data connections
Connections

SeaTalkng backbone, 1 x SeaTalkng spur, 5 x transducer connections with spade terminals

Environmental
Relative humidity

Max. 95%

Splash proof

IPx2

Storage temperature

-25° C to +70° C

Operating temperature

-15° C to +55° C

Conformance
Standards

Europe: 2004/108/EC, Australia and New Zealand: C-Tick, Compliance Level 2

What's in the box?


1

iTC-5

2

Fixing screws x 2

3

Documentation

4

400mm SeaTalkng spur cable (A06038)