New, low prices on Axiom chartplotters!
See All DealsNew! Raymarine + Florida Marine Tracks
Learn moreThe SeaTalk NG to SeaTalk 1 adaptor kit allows older SeaTalk 1 products to communicate with newer SeaTalk NG devices. Older autopilot systems, instruments, GPS receivers, Smart Controllers, and LifeTag systems can be integrated into a modern SeaTalk NG network.
SeaTalk 1 to SeaTalk NG converter
SeaTalk NG Terminators (x2)
SeaTalk NG Blanking Plugs (x2)
1m (3.3-foot) SeaTalk 1 to SeaTalk NG converter cable
SeaTalk NG power cable
1m (3.3-foot) SeaTalk NG spur cable
Used for connecting SeaTalk 1 devices to the SeaTalk NG network. Converter only - no cables.
Environmental | |
---|---|
Relative humidity | Up to 95% |
Waterproof rating | IPx6 |
Storage temperature | -20°C to +65°C (-4°F to 149°F) |
Operating temperature | -10°C to +50°C (14°F to 122°F) |
Physical | |
---|---|
Connections | SeaTalkng backbone x 2, SeaTalkng spur x 2, SeaTalk spur x 1 |
Dimensions | Height: 30.2 mm (1.19 in), Width: 109.45 mm (4.3 in), Depth: 21.45 mm (0.84 in) |
Power | |
---|---|
Current | Peak operating current: 50 mA, Peak supply current: 950 mA |
Operating voltage range | 9 V dc to 16 V dc |
Nominal supply voltage | 12 V dc |
LEN (NMEA 2000 Load Equivalency Number) | 1 (plus LEN 3 for each powered evice) |
Conformance | |
---|---|
Standards | EMC Directive 2014/30/EU, Australia and New Zealand: C-Tick, Compliance Level 2 |
1 | SeaTalk-SeaTalkng convertor |
2 | SeaTalkng backbone terminator x 2 |
3 | SeaTalkng blanking plugs x 2 |
4 | SeaTalk-SeaTalkng converter cable 400 mm (15 in) |
5 | SeaTalkng power cable 1 m (3.3 ft) |
6 | SeaTalkng spur cable 1 m (3.3 ft) |