ECI-100 Universal Engine and Control Interface

Bridge engine instrumentation and drive-by-wire steering with Raymarine autopilot and navigation systems

Find out more information on ECI-100 Engine Compatibility, click the link below.
Engine Compatibility

ECI-100
 

The ECI-100 Universal Engine and Control Interface is an innovative and affordable solution for bridging engine instrumentation and drive-by-wire steering with Raymarine autopilot and navigation systems.

DAME Nominated 2013 | Raymarine

A simple isolated CAN Bus solution, the ECI-100 offers reliable integration with Raymarine's latest generation of multifunction displays and also delivers a seamless autopilot steering interface to Raymarine's Evolution EV-2 Drive-by-Wire autopilot system. 

 
 

A simple, single point of connection for engine data

  • Affordable and uncomplicated solution eliminates the need for multiple engine and autopilot gateways
  • View engine data displays alongside Raymarine's industry leading radar, sonar and navigation technologies using a single touch screen display.
  • Easy access to customisable displays to show engine performance data, fuel consumption, alarms and much more.
  • View engine information displays on your smart phone or tablet with Raymarine mobile apps.
  • Simple to install ECI-100 makes engine and navigation integration a reality for virtually any size vessel.
gS Series with engine display | Raymarine
 
 
Autopilot Control | Raymarine

Enjoy Autopilot Control from any network display

The ECI-100 brings Raymarine's Evolution 9-axis sensor and adaptive autopilot control to drive-by-wire propulsion without the need for a proprietary autopilot gateway.

Enjoy full autopilot control using a single touch screen display.

 
 

From aSeries to gS Series...

aSeries eSeries gS Series | Raymarine

Engine information displays and autopilot control via the ECI-100 are available on our space saving aSeries displays, third generation cSeries and eSeries displays and our flagship big screen gS Series displays. Version 8 LightHouse software is required and will be available to download from our software updates section later this month.

 

ECI-100 Engine Data Parameters

Engine speed
Transmission oil temperature
Engine oil temperature
Fuel tank level
Engine temperature
Trip fuel used (calculated by ECI-100)
Engine oil pressure
Alternator potential
Engine coolant pressure
Total engine hours
Engine fuel rate
Engine percentage load
Boost pressure
Transmission gear
Battery potential
VIN (not shown on the display)
Transmission oil pressure
Software number (not shown on the display)

*Volvo and Volvo Penta are trademarks™ and/or registered® trademarks of Volvo Trademark Holding AB. Raymarine is not affiliated with, or endorsed by, Volvo.

 

ECI-100 Specifications

  ECI-100 Dimensions  
  GENERAL SPECIFICATIONS
Part Number E70227
Dimensions (L x H x D) 109.2 x 21.35 x 30.2 mm
(4.29 x 0.84 x 1.18 in)
View Dimensions Diagram Above
Nominal power supply 12 V dc
Operating voltage range 10.8V to 31.2V dc
Power consumption 3.6W (maximum)
Current 10mA
Fuse/breakers 5A
Load equivalency number 1
Operating temperature -20º to +55ºC
(+4ºF to 131ºF)
Storage temperature -30º to +70ºC
(-22ºF to 158ºF)
Relative humidity 95%
Waterproofing IPX6

ECI-100 User Documents