cSeries Specifications

  cSeries c9 Multifunction Display | Raymarine cSeries c12 Multifunction Display | Raymarine
Model Raymarine c95 / c97 Raymarine c125 / c127
Chartplotter Model c95
Chartplotter - Fishfinder Model c97
  Note: Part numbers shown are for displays without charts. Please view the ordering information for full product range
w x d x h
HybridTouchTM No
Please see our e Series range if you require HybridTouch
Nominal Voltage 12/24 v DC
Operating Voltage 10.8 - 31.2 v DC
Power Consumption (at full brightness) 16W max 36W max
Display 9" TFT backlit LED
800 x 480 pixels
12" TFT backlit LED
1280 x 800 pixels
Viewing Angles 80° left/right and 80°/60° top/bottom
Networking up to 8 displays plus sensors
Waterproofing IPX6
Mounting Methods Surface mount. Trunnion mount with optional bracket
Cartography Raymarine LightHouse Charts, C-MAP by Jeppesen and Navionics
GPS Built-in 50 channels; WAAS, EGNOS and MSAS.
1 second hot start; 36 seconds upwards cold start; Automatic signal acquisition and almanac update; Operating frequency: 1575.42MHz; Geodetic Datum: WGS-84, alternatives available through Raymarine displays; Active Jamming Reduction; Ceramic Chip antenna; Accuracy: without SBAS < 15m 95% of the time. With WAAS/EGNOS <5m 95% of the time.
Operation temp range
Connectivity 2 x SeaTalkhsports 100Mbits/s. RayNet type
1 x SeaTalkng connection
2 x NMEA 0183 ports: NMEA port 1 input and output (4800/38,400 baud). NMEA port 2 input only (4800/9600,38,400 baud)
Wireless Connectivity WiFi: 802.11 b/g;
Bluetooth: AVRCP 2.1+EDR power class 1.5.
Video 1 x BNC (female) composite video input connector (PAL/NTSC formats)
Sonar ClearPulse with 50/83/200 kHz operating frequencies up to 600W RMS.
Sonar transducer port (c97/e97/c127/e127 versions only).