It appears that you are within the United States, if this is not correct please select the correct location from the options below

ACU-150

Evolution autopilot actuator control unit for hydraulic steering only

Product Options
ACU-150

ACU-150 Overview

The ACU-150 (Actuator Control Unit) is a key component for Evolution autopilots used on vessels with hydraulic steering. The ACU-150 houses the main power and drive electronics for direct connection to your vessel’s steering system and 12-volt DC electrical source. Pair the ACU-150 with a Type 1 12-volt hydraulic drive unit.  The ACU-150 and Type 1 hydraulic pump combination is designed for hydraulic steering systems with a steering ram capacity between 4.9 cu. in.( 80cc) and 14.0 cu in (230cc). Combine with an EV-1 sensor, autopilot control head, and Type 1 hydraulic pump for a complete autopilot system. 

ACU-150 Models


ACU-150 Evolution autopilot actuator control unit SKU: E70430

ACU-150 Evolution autopilot actuator control unit


ACU-150 Resources

Output
Drive current output

Maximum continuous 12 A at supply voltage

Physical
Dimensions

Width: 180 mm (7.1 in), Height: 140 mm (5.5 in), Depth: 52 mm (2.0 in)

Weight

0.6 kg (1.32 lbs)

Environmental
Relative humidity

Max. 93%

Waterproof rating

Connector panel: IPx2, Drive electronics: IPx6

Storage temperature

-30 °C to +70 °C (-22 °F to 158 °F)

Operating temperature

-20 °C to +55 °C (-4 °F to 131 °F)

Conformance
Standards

Europe: 2004/108/EC, Australia and New Zealand: C-Tick, Compliance Level 2

Power
Power consumption (standby)

300 mA (12 V)

Nominal supply voltage

12 V dc

Operating voltage range

10.8 V dc to 15.6 V dc

LEN (NMEA 2000 Load Equivalency Number)

1

What's in the box?


1

ACU unit

2

Documentation

3

Screws (pan head type)

4

SeaTalkng spur to bare wires cable 1 m (3.3 ft)