Engineered for serious anglers, the CP570 sonar module brings best-in-class target separation and high-resolution CHIRP sonar imagery to Raymarine chartplotters. Using a wide spectrum of frequencies and greater sensitivity, the CP570's advanced CHIRP transceiver can see through dense schools of baitfish, identify thermoclines, and simultaneously target desired game fish.
Rated for offshore use and rough conditions, the CP570 intelligently filters out unwanted noise while delivering reliable bottom tracking. For the professional angler, the CP570’s two fully independent sonar channels deliver faster target identification and up to 4kW of combined output power.
Superior target definition and enhanced sensitivity using Raymarine’s exclusive wide spectrum CHIRP sonar technology.
Target fish, identify bait, and track the sea floor to 10,000ft. (3,000m)
Hunt for fish in different parts of the water column with the CP570’s two fully independent 2kW sonar channels.
With ten times the resolution of ordinary sonars, the CP570 delivers sharper, more defined fish targets and automatically filters out unwanted noise, so you never miss the action below.
TruZoom™ magnification mode reveals extra target detail without any loss of resolution
The CP570’s ultra-fast ping rate processing delivers accurate bottom tracking in extreme offshore conditions
Choose optional low, medium, and high CHIRP frequency transducers in standard or wide-beam to match your fishing preferences.
The CP570 automatically recognizes connected transducers and adjusts sonar parameters for optimized performance
View and control each CHIRP channel independently and create your own combination of full or split-screen sonar windows on Raymarine chartplotter displays
Florida charter boat captain Quinton “Q” Dieterle goes hunting underwater with the CP570 Professional CHIRP Sonar
CP570 Sonar Module SKU: E70258
2kW High Performance CHIRP Sonar
Up to 95%
-30°C to +70°C (-22°F to 158°F)
-20°C to +50°C (-4°F to 122°F)
Up to 2 KW per channel (maximum) (total 4 KW)
25kHz to 255kHz
0.6 m (2 ft) (to 3000 m (10,000 ft) (Dependant upon connected transducer)
Power connection, Network connection (RayNet connector) 10 / 100 Mb/s, Transducer connection
Height: 248.1 mm (9.8 in), Width: 352.5 mm (13.9 in), Depth: 109.9 mm (4.3 in)
6.35 kg (14.0 lbs)
EN 60945:2002, EMC Directive 2014/30/EU, Australia and New Zealand: C-Tick, Compliance Level 2
30.6 W (Maximum)
3 A RMS
|Nominal supply voltage||
12 V dc / 24 V dc
|Operating voltage range||
10.8 V dc to 31.2 V dc
Power cable 1.5 m (5 ft)
Fixings x 4
RayNet (Female) to RayNet (Female) network cable 2 m (6.56 ft)