|G Series||Download Here|
|E Wide||Download Here|
|C Wide||Download Here|
|E Classic||Download Here|
|A Classic||Download Here|
Firmware update processes are done at your own risk. Before initiating the update process be sure to backup and make copies of all important files.
If the firmware process is interrupted your product may not function properly, therefore do not interrupt the process and ensure the unit is on a reliable power supply. Damage caused by incomplete upgrades will not be covered by Raymarine warranty.
By Downloading the software, you agree to these terms.
|v3.04 & 3.12||Apr 2020|
Please Note: This only affects Evolution Pilot systems with the Actuator Control Unit (ACU) at v3.11 software level and is operating without a Rudder Reference Transducer installed.
It does not affect autopilots that have a Rudder Reference Transducer installed.
It does not affect earlier ACUs with v3.04 or lower software levels.
It does not affect the EV2 Drive by Wire Autopilot system.
It does not affect the ACU300system.
|v3.04 & 3.11||Nov 2019|
Some Raymarine products contain software code developed by third parties that are covered by open source GPL and LGPL software license agreements. You can view the third party license agreements by visiting the Manuals section of our website.
To access the open source GPL and LGPL licensed executables click here
Info: a/c/e/eS/gS Download - This download now contains the following additional product updates: Pilots – Evolution ACU, Evolution CCU, p70
Note: The included R4 pilot software requires recalibration of the autopilot once complete.
Warning a/c/e/eS/gS Series - Updating via a/c/e/eS/gS Series display. MFD software must be at level v13.37 and above
Warning G Series - Updating via G Series system. System software must be at level v4.49 and above
Warning Pilot System - You must update EV Sensor before updating your ACU