It appears that you are within the United States, if this is not correct please select the correct location from the options below

JCU-2 Remote Control

Remote Control for M300, M400, and M500 Series. 

Product Options
JCU-2 Remote Control
M400 Thermal Camera

JCU-2 Overview

The JCU-2 joystick controller is the primary control for the FLIR M300, M400, and M500 Series maritime thermal cameras. The ergonomic joystick and keypad are used to wake the system or put the camera in standby mode. With the JCU-2, you can operate the pan and tilt movement, zoom the camera, control camera modes, and activate features. The JCU-2 also allows you to configure the camera's system settings using on-screen display menus.

JCU-2 Models


Teledyne FLIR JCU-2 SKU: 500-0398-10

Teledyne FLIR JCU-2


JCU-2 Remote Control Resources

Physical
Dimensions

Height: 142.8 mm (5.62 in.), Width: 90.8 mm (3.58 in.)

General
Network / PoE connection

1 x RJ45 Ethernet 10/100 Mb/s connector

What's in the box?


1

JCU-2 keypad

2

Keypad mat

3

Mounting gasket

4

4x Mounting screws, rubber washers, mounting clamps

5

Cable gland nut

6

RJ45-to-RJ45 Ethernet cable, 7.6 m (25 ft)

7

Documentation